1. Manuals
  2. Brands
  3. Cybernet Manuals
  4. Desktop
  5. IPC-R2ix
  6. User manual

Cybernet IPC-R2ix User Manual

Rugged mini computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IPC-R2ix
User Manual
1

Advertisement

Table of Contents
loading

Related Manuals for Cybernet IPC-R2ix

Summary of Contents for Cybernet IPC-R2ix

  • Page 1 IPC-R2ix User Manual...

  • Page 2: Declaration Of Conformity

    Declaration of Conformity This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 3: Safety Instructions

    Safety Instructions Always read the safety instructions carefully. Keep this equipment away from humidity. Lay this equipment on a reliable flat surface before setting it up. Confirm the voltage of the power source and adjust accordingly to 110/220V before connecting the equipment to the power inlet. Place the power cord in such a way that it cannot be stepped on.

  • Page 4: Weee Statement

    WEEE Statement (Waste Electrical and Electronic Equipment) The WEEE directive places an obligation on EU-based manufacturers, distributors, retailers and importers to take-back electronics products at the end of their useful life. A sister Directive, ROHS (Restriction of Hazardous Substances) compliments the WEEE Directive by banning the presence of specific hazardous substances in the products at the design phase.
  • Page 5 Introduction Congratulations for purchasing the IPC-R2ix. The IPC-R Series is your best Slim Rugged PC choice. With the fantastic appearance and small form factor, it can easily be set anywhere. The feature packed platform powered by cutting- edge 4 Gen Intel® Quad-Core™...

  • Page 6: Expansion Slots

    Storage 2 Front Panel Accessible 2.5” HDD SATAIII 6 Gbps with Key Locks 1 mSATA SATAIII 6Gbps (the use of mSATA will eliminate the use of mPCIe slot). Wall Mount Support Wall-mount by Ear Mounting Bracket. Expansion Slots 1 x mini-PCIe (Full size): PCIe+USB and shared with mSATA 1 x mini-PCIe (Haif size): PCIe+USB 2 x internal 10-pin (internal USB 2.0) Connector Internal Port...
  • Page 7 Power Supply 65 Watt Power Adapter, AC Input: 100~240V AC, 1.5A, 50-60Hz. DC Output: 19V, 3.42A Dimensions 273mm (L) x 109mm (W) x 55mm (H) (10.7” x 4.3” x 2.17”) without mounting ear. Weight 2.8 kg (6 lb) Operating Environment -20⁰C to 70⁰C (-13⁰F to 157⁰F) Storage Temperature -40⁰...

  • Page 8: Power Management

    Power management of IPC-R2ix has the potential to save significant amounts of electricity as well as deliver environment benefits. To be energy efficient, turn off your display or set your IPC-R2ix to sleep mode after a period of user inactivity.
  • Page 9 Select a power plan that suits your personal needs. You may also fine-tune the settings by clicking [Change plan settings]. The Shut Down IPC-R2ix Menu presents the options of Sleep (S3) & Shut Down (S5) for rapid and easy management of your system power.
  • Page 10  Turn off the display after 15 minutes.  Initiate Sleep after 30 minutes. Waking the System Up The IPC-R2ix shall be able to wake up from power saving mode in response to a command from any of the following:  the power button, ...
  • Page 11 IPC-R2ix Mechanical Dimension Figure 1: Overview...
  • Page 13 System is running. This LED will blink when in Sleep mode. Figure 3: Front Panel I/O view (HDD) The IPC-R2ix is designed with easy access 2.5 inch SATAII HDD bays, which can be locked. The picture on the left indicates the HDD1 bay. The HDD2 bay, with operating system support, allows for hot swapping the hard drive, as long as data is not being written to or read from the drive.
  • Page 14 Figure 4: Front Panel I/O view (HDD) COM1/2 support RS-232/422/485, COM3, COM4 support RS-232 only.
  • Page 15 Figure 5: Back Panel I/O view (DC‐IN) The IPC‐R2ix series offers 9 to 36 VDC power input using standard notebook DC Jack Ø 5.5mm x 2.5mm and 3 PIN Pitch =3.81mm terminal block connector from the external PSU. Figure 6: Back Panel I/O view (Power‐Switch)
  • Page 16 The IPC-R2ix series offers terminal block to control power on-off with LED function. Figure 7: Back Panel I/O view (USB2.0) The IPC-R2ix series comes with two USB 2.0 hosts on the back panel. The USB interface supports Plug and Play, which enables the user to connect or disconnect a device whenever the user want, without turning off the system.
  • Page 17 Figure 8: Back Panel I/O view (USB3.0) The IPC-R2ix series comes with four USB 3.0 hosts on the back panel. The USB interface supports Plug and Play, which enables the user to connect or disconnect a device whenever the user want, without turning off the system. The hosts can be used for an external flash disk or hard drive for storing large amounts of data.
  • Page 18 LAN2: Realtek RTL8111G GIGA LAN support PXE, Wake on LAN. LAN1: Intel®I218LM GIGA LAN support PXE, Wake on LAN, AMT IPC-R2ix BIOS introduction This section explains how to use the UEFI SETUP UTILITY to conigure your system. The UEFI chip on the motherboard stores the UEFI SETUP UTILITY. You may run the UEFI SETUP UTILITY when you start up the computer.
  • Page 19 Advanced Screen In this section, you may set the configurations for the following items: CPU Configuration, Chipset Configuration, Storage Configuration, Intel(R) Rapid Start Technology, AMT Configuration, Super IO Configuration, ACPI Configuration, USB Configuration and Voltage Configuration.

  • Page 20: Cpu Configuration

    Instant Flash Instant Flash is a UEFI lash utility embedded in Flash ROM. This convenient UEFI update tool allows you to update system UEFI without entering operating systems first like MS-DOS or Windows®. Just launch this tool and save the new UEFI file to your USB lash drive, floppy disk or hard drive, then you can update your UEFI only in a few clicks without preparing an additional floppy diskette or other complicated lash utility.
  • Page 21 installed CPU does not support Hyper-Threading technology. Active Processor Cores Select the number of cores to enable in each processor package. CPU C States Support Enable CPU C States Support for power saving. It is recommended to keep C3, C6 and C7 all enabled for better power saving.

  • Page 22: Chipset Configuration

    You may select [Enabled] to enable CPU internal thermal control mechanism to keep the CPU from overheating. No-Execute Memory Protection No-Execution (NX) Memory Protection Technology is an enhancement to the IA-32 Intel Architecture. An IA-32 processor with “No Execute (NX) Memory Protection” can prevent data pages from being used by malicious software to execute codes.
  • Page 23 DRAM Frequency If [Auto] is selected, the motherboard will detect the memory module(s) inserted and assign the appropriate frequency automatically. VT-d Intel® Virtualization Technology for Directed I/O helps your virtual machine monitor better utilize hardware by improving application compatibility and reliability, and providing additional levels of manageability, security, isolation, and I/O performance.
  • Page 24 This allows you to set the power state after an unexpected AC/power loss. If [Power Off] is selected, the AC/power remains off when the power recovers. If [Power On] is selected, the AC/power resumes and the system starts to boot up when the power recovers. If [LAST STATE] selected, the AC/power restores to the last power state when the power recovers.
  • Page 25 Cybernet e-recycling SOP Cybernet has an e-recycling program that is very easy to use. Just follow the steps explained below or go to our website at www.cybernet.us 1. Request an RMA via phone, email or support request. 2. We will arrange a call tag to have the product picked up. Just have it packed and ready to ship.

Table of Contents