The MAINS plug is used as the disconnect device, the discon- HAZARDOUS RADIATION EXPOSURE. PUMA 1000 as the top of the line features our newly nect device shall remain readily operable. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO Warning: the user shall not place this apparatus in the area during NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
“LoMID” control (#10). Due to the broader ran- the way up without reaching a satisfying gain range, you signal level to the internal operating level of PUMA 1000 ges which are covered by these controls the sound never better deactivate the “-10 dB”...
Page 4
The “RETURN/LINE IN” jack (#26a) can also be used to power up or down your PUMA 1000 – the LED above the male XLR output. “POWER RECEPTACLE” on the back panel (#22) and the connect various external audio sources to the PUMA switch illuminates when the function is engaged.
Always use high quality shielded instrument cables for is controlled by the “MASTER” volume control (#15) on For 230 V units the fuse for the PUMA 1000 must be a 4 “VOLTAGE SELECTOR” before powering up the unit. connecting to and from external devices. Keep the...
Hz. At the same time there is a level boost of 12 dB. effect return / line in 10 k ohms EFFECTS LOOP This switch makes your PUMA 1000 the ideal amp for the nominal input level 0 dBu SEND...